Increment function on BCR2000

3 posts / 0 new
Last post
Knob Twiddler
Knob Twiddler's picture
Increment function on BCR2000

Hi there,

I would likt to select the different filter types of the Xfer plugin Nerve with a simple button on the BCR.

There are 4 filtertypes:

none: 0-42 cc

L: 43-84 cc

B: 85-126 cc

H 127 cc

How can i program this with the increment function?

The jumps are 43steps except for the last one...I can't figure it out...

Mark van den Berg
Mark van den Berg's picture

Maybe I'm missing something, but can't you work downward from 127? Of course the lowest value won't be 0 then, but it doesn't have to be, does it?
So (if my calculations are correct) the increment can then be anything from +29 (yielding 40, 69, 98, 127) to +42 (1, 43, 85, 127).

Maybe +40 is the simplest: 7, 47, 87, 127.
In BC Manager you can set this up as follows:

On the General tab:
Show value = On
Default Value = 7/47/87/127 (127 may be best)

On the Standard output tab:
Type = Control Change
Channel = ...
Controller = ...
Value 1 = 127
Value 2 = 7
Mode = Increment
Increment = +40

Note that Default Value is essential to guarantee the correct starting point.

Each press of the button then selects the next value: 7 -> 47 -> 87 -> 127 -> 7.

Hope this helps,
Mark.

Knob Twiddler
Knob Twiddler's picture

Thank you Mark, 

I forgot about the other direction. It all works now.